Loading

Fiber Waste From Cotton Process Technological Processes
Abbazov Ilkhom1, Xodjiev Muksin2, Makhkamov Iqbol3

1Khodjiev Muksin, Professor of Guliston State University, Gulistan, Uzbekistan.
2Abbazov Ilkhom, PhD of Jizzakh Polytechnical Institute, Jizzakh, Uzbekistan.
3Makhkamov Iqbol, Assistant Ferghana Polytechnicl Institute, Fergana, Uzbekistan.

Manuscript received on February 01, 2020. | Revised Manuscript received on February 05, 2020. | Manuscript published on February 30, 2020. | PP: 5-8 | Volume-9 Issue-3, February, 2020. | Retrieval Number: C4744029320/2020©BEIESP | DOI: 10.35940/ijeat.C4744.029320
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: This article shows the changes in fiber waste from cotton processing and how it is gradual. The dust emitted in the dry-cleaning shop is only 5-7 mg/m3 of dust, less than the air in the building where the drying machines are located. This is due to the fact that high moisture is absorbed into the dryers, which prevents the separation of fine dust from the mass. The large dispersed dust, even at high humidity, was separated and was unable to disperse in the building. In the drying units, dust that comes with an atmospheric drying agent causes trouble. This dust, even with a rough dispersion, sits in the dryer along with the gas flow to the roof of the building and the ground near the drying shop. The amount of dust released is 500-600 kg/day. In the compartment, the dust emits from the air pneumatic system, which is an indispensable dust in the air drying shop, as well as the dust generated by cleaning machines. This is a powdery fiber, which contains less mineral fractions. The small fractions are composed of mostly dirty particles. Powdered air is also isolated from aspirate systems of gin suppliers, which absorb absorbed air or polluted air from pollutants. Such suction system can be included in the aspiration of the cotton distribution screw. It is established that only one cotton gin industry produces 150-350 tons of fiber per year, industry-wide waste is 5-6 tons, and 70-90% of organic waste is non-toxic. This will serve as a feedstock for the use of animal feed in the agricultural sector. Researches have been carried out to identify the amount of emissions from the ginneries at the Karasu, Mustaqillik and Ginnery factories in the Tashkent region and the Metan cotton gin enterprises in Samarkand region.
Keywords: Powder holders, dust, mineral waste, organic waste, technological process, cotton, cleaning plant.