Three- Dimensional Simulation of Crack Propagation using Finite Element Method
Abdulnaser M. Alshoaibi1, Abdulrahman A. Bin Ghouth2, Yahya Ali Fageehi3

1Abdulnaser M. Alshoaibi*, Mechanical Engineering Department, Jazan University,  Kingdom of Saudi Arabia.
2Abdulrahman Bin Ghouth, Mechanical Engineering Department, Jazan University, KSA,
3Yahya Ali Fageehi, Mechanical Engineering Department, Jazan University, KSA,
Manuscript received on November 21, 2019. | Revised Manuscript received on December 15, 2019. | Manuscript published on December 30, 2019. | PP: 892-897 | Volume-9 Issue-2, December, 2019. | Retrieval Number:  A1895109119/2020©BEIESP | DOI: 10.35940/ijeat.A1895.129219
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: The 3D finite element software ANSYS Workbench software has been employed for simulation of engineering geometries which are containing a pre-cracks and holes. The new feature in this software is using the smart crack growth procedure and the mesh smoothing technique which provides an adaptive and smooth mesh around the crack path as well as the higher stresses area. Under the assumption of LEFM, the stress intensity factors was used as a crack growth criterion which provided as indicators of failure compared to the fracture toughness or threshold stress intensity factors (SIFs) in both static and dynamic loading respectively. The stress intensity factors were calculated for every crack growth step and the fatigue life time was predicted according to the number of cycles. The effect of the nominal notch position of the crack was illustrated. Simulations performed with Ansys show an identical crack path on structures that is in line with that of the experimental and numerical results performed by other researchers.
Keywords: Fatigue analysis, FEM, ANSYS Workbench, Crack growth path, Nominal notch position.