Improvement in Cutoff Frequency of Microstrip Butterworth Low Pass Filter using DGS Technique
Kalyan Acharjya1, Dheeraj Acharya2, Girijashankar Sahoo3, Chandra Shekhar Rajora4
1Kalyan Acharjyahas, Department of Electronics and Communication Engineering, Jaipur National University, Jaipur (Rajasthan), India.
2Dheeraj Acharya, M. Tech, Govt. Engineering College, (Rajasthan), India.
3Girijashankar Sahoo, Associate Professor, Jaipur National University, Jaipur (Rajasthan) India.
4Chandra Shekhar Rajora, Assistant Professor at Jaipur National University, Jaipur (Rajasthan) India.
Manuscript received on November 21, 2019. | Revised Manuscript received on December 08, 2019. | Manuscript published on December 30, 2019. | PP: 1121-1124 | Volume-9 Issue-2, December, 2019. | Retrieval Number: B2699129219/2020©BEIESP | DOI: 10.35940/ijeat.B2699.129219
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: This paper presents the design, analysis and fabrication of Butterworth Low pass filter with sharp rejection response using defected ground surface technique. The work is carried out to design a low pass filter with cut-off frequency 2.5 GHz to achieved the broad frequency response; the first step is to make a rectangle of 10x10mm at ground surface and the equivalent circuit for the DGS, subsequently followed to consequent L-C parameters extraction using analysis of S parameters response (EM simulation). The designed Butterworth low pass filter is realized and optimized using DGS (Defected Ground Structure) to attain a compact size, satisfactory transition sharpness along with low insertion loss in pass band and wide rejection in the stop band. The fabricated device showed the good conformity with theoretical and VNA measured result.
Keywords: Low Pass Filter, Micro strip Filter, Butter worth, Filter, DGS.