Design the Optimum Sizes and Analysis Shapes of Gantry Machines
V. Balaji1, R. Selvam2
1Dr. V. Balaji*, Department of Mechanical Engineering, Sri Sai Institute of Technology and Science, Rayachoty, Andhra Pradesh, India. E-mail: vbalaji_b1980@yahoo.co.in
2Dr. R. Selvam, Department of Mechanical Engineering, Saveetha Engineering College, Chennai, India. E-mail:selvam_r7@ yahoo.com.
Manuscript received on November 22, 2019. | Revised Manuscript received on December 15, 2019. | Manuscript published on December 30, 2019. | PP: 3188-3198 | Volume-9 Issue-2, December, 2019. | Retrieval Number: B4407129219/2019©BEIESP | DOI: 10.35940/ijeat.B4407.129219
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: In the present day’s need of the special purpose machine is more to the industries. Earlier heavy load carrying machines are there that to in open place only. By taking them in consideration in this paper made such that must lift 1 ton capacity weight with very effective in operation and maintenance in small area of industry. The initial period many type of gantry are used to lift the heavy load and problem with that is they were heavy in structure and completely manually one. So designing the new structure with new technology which can easily pick the material and place to another place using gantry in small scale industry. Redesigning the structure reducing the material to save the cost of structure. In this project gantry design is developed by considering present development in machinery, it helps to pick and place the heavy parts in rail transportation, aerospace and other automobile industries. In this paper going to discuss how the beam will deform when it having self-weight, gravity loading, structural analysis and modal analysis is done on the machine which shows the results like stresses and displacement, to reduce the cost of the machine, thickness of machine columns is reduced and this is the type of optimization carried out here. The amount of strength and stiffness is maintained same as the original model and all results compared to the original model, the structural analysis and modal which is of main result viewing in the whole work.
Keywords: Loading Condition, Structural Analysis, Optimization of Structural Analysis, Model Analysis.