Influence of Cutting Parameters and Tool Path Strategies on Surface Roughness in Pocket Milling of UNS A96082 Alloy
M. Rajyalakshmi1, P. Suresh Babu2
1M. Rajyalakshmi*, Asst. Professor, Department of Mechanical Engineering, PVP Siddhartha Institute of Technology, Vijayawada, (Andhra Pradesh), India.
2P. Suresh Babu, Professor, AAR Mahaveer Engineering College, Hyderabad, (Telangana), India.
Manuscript received on September 24, 2019. | Revised Manuscript received on October 05, 2019. | Manuscript published on October 30, 2019. | PP: 6241-6245 | Volume-9 Issue-1, October 2019 | Retrieval Number: A1995109119/2019©BEIESP | DOI: 10.35940/ijeat.A1995.109119
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: CNC Pocket Milling is the commonly employed machining process in molding, aircraft building, and shipbuilding industries. Surface integrity is one of the main quality parameters considered to accept the component. In the present work, an attempt is made to optimize the cutting factors in pocket milling of UNS A96082 using two different tool path strategies to get a better surface finish. Speed, Feed and Step over are considered as influencing parameters in the present study for measuring surface roughness. Taguchi experimental design method is employed to conduct experiments and to optimize the cutting parameters. It is observed that the results obtained from confirmation experiments also show nearer value for predicted surface roughness.
Keywords: Optimization, pocket milling, Taguchi method, Tool Path strategy, UNS A96082.