Influence of Location and Thickness Variations on Guided Waves in Defective Carbon/Epoxy Plate
Noorfaten Asyikin Ibrahim1, Bibi Intan Suraya Murat2
1Noorfaten Asyikin Ibrahim*, Faculty of Mechanical Engineering, Universiti Teknologi MARA (UiTM), 40450 Shah Alam, Selangor, Malaysia.
2Bibi Intan Suraya Murat, Faculty of Mechanical Engineering, Universiti Teknologi MARA (UiTM), 40450 Shah Alam, Selangor, Malaysia.
Manuscript received on September 23, 2019. | Revised Manuscript received on October 15, 2019. | Manuscript published on October 30, 2019. | PP: 5736-5740 | Volume-9 Issue-1, October 2019 | Retrieval Number: A3055109119/2019©BEIESP | DOI: 10.35940/ijeat.A3055.109119
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: This paper addresses the effects of plate thickness and defect location on guided wave propagation in carbon/epoxy plates. A three-dimensional (3D) finite element model (FEM) of the plate was developed using MATLAB program codes, and simulated in Abaqus/Explicit. Referring to experimental ultrasonic C-scan images, the complex impact damage was modelled with irregular-shaped delamination and through-thickness matrix cracks. The simulated results show that a slower arrival time signal and amplitude drop of guided wave captured behind the defective region can be used as an indicator of the impact damage. A larg Oer scattering occurred when delamination was located closer to the plate surface. The extent of scattering gets larger, especially in the direction of 345o from the excitation point. It is also observed that the impact damage can still be detected through a line scan method across the impact damage, although the wave attenuation is greater in a thicker composite plate. By investigating these factors independently, the trends of the scattered guided ultrasonic waves can be classified and perhaps will revolutionize a smart non-destructive method for composite structure in the future.
Keywords: 3D finite element, composite plate, guided ultrasonic waves, impact damage.