Buckling Analysis of Composite Cylindrical Shell under Compressive Load
Y. Pratapa Reddy1, B. Aditya Mani Sai Pavan2, K Satyanarayana3, T. Veeraiah4
1Y. Pratapa Reddy, Department of Mechanical Engineering, Vasireddy Venkatadri Institute of Technology, Nambur V, Pedakakani Md, Guntur (A.P), India.
2B. Aditya Mani Sai Pavan, Department of Mechanical Engineering, Vasireddy Venkatadri Institute of Technology, Nambur V, Pedakakani Md, Guntur (A.P), India.
3Dr. K Satyanarayana, Department of Mechanical Engineering, Vasireddy Venkatadri Institute of Technology, NamburV, Pedakakani Md, Guntur (A.P), India.
4T. Veeraiah, Department of Mechanical Engineering, Kallam Haranadhareddy Institute of Technology, NH-5, Chowdavaram, Guntur (A.P), India.
Manuscript received on 22 April 2019 | Revised Manuscript received on 01 May 2019 | Manuscript Published on 05 May 2019 | PP: 161-165 | Volume-8 Issue-2S2, May 2019 | Retrieval Number: B10350182S219/19©BEIESP
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The cylindrical components generally are subjected to buckling load in many of the applications. The shear stresses and the deformation of the material play key role in the life of the component. The present research involves the evaluation of such cylindrical component made of epoxy material, subjected to compressive load. The cylinders are made in two types, without and with reinforcement of fibres, with 0, 1, 2 and 4 holes equally spaced around the lateral surface. The system is simulated using ANSYS. The results obtained from the experimentation are analysed.
Keywords: Composite Material, Buckling Factor, Graphite, Epoxy, Cylindrical Shell, Inter-Laminar Stresses, Intra-Laminar Stresses.
Scope of the Article: Composite Materials