210 Mw Turbo Generator’s Hydrogen Gas Cooling System Online Monitoring and Controlling using Node Red Flow Based IoT
K. Dwarakesh1, Rathika R2, Aarthi Suriya S3
1K.Dwarakesh, Assistant Professor, Department of EEE, Bharath Institute of Higher Education and Research, (Tamil Nadu), India.
2Rathika R, Assistant Professor, Department of EEE, Bharath Institute of Higher Education and Research, (Tamil Nadu), India.
3Aarthi Suriya S, Assistant Professor, Department of EEE, Bharath Institute of Higher Education and Research, (Tamil Nadu), India.
Manuscript received on 13 September 2019 | Revised Manuscript received on 22 September 2019 | Manuscript Published on 10 October 2019 | PP: 82-87 | Volume-8 Issue-6S2, August 2019 | Retrieval Number: F10180886S219/19©BEIESP | DOI: 10.35940/ijeat.F1018.0886S219
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: This undertaking is about plan and execution of remote observing and controlling of 210 MW TURBO GENERATOR’S HYDROGEN COOLING SYSTEM utilizing NODE RED BASED IOT PROGRAM. The quicker heat scattering of generators in power plants calls for hydrogen cooling, and water is utilized as coolant to chill off the hot hydrogen which turns out from the hydrogen cooling framework (HCS) at the producing end. Along these lines, in enormous creating plants, the way toward cooling and the coolant become basic pieces of the warmth exchangers. Subsequently, necessity of a dependable HCS is an unquestionable requirement. The primary point of this task is to naturally refill the hydrogen gas in the hydrogen cooling arrangement of turbo generators at whatever point the hydrogen level gets diminished than the ideal hydrogen level. This framework functions admirably in both ordinary necessity conditions and furthermore during basic prerequisite conditions, when there is a surprising spillage in the framework. The whole procedure control and observing, famously known as human–machine interface of HCS, has been created and reproduced on NODE RED BASED IOT PROGRAM. [1],[ 3],[5].
Keywords: Nline Generator HCS Monitor, Auto and Remote HCS Monitor ,Generator’s Hydrogen Pressure Level, Auto Refill of Hydrogen, Hydrogen Cylinder’s Pressure Level,ADS1115 ADC, Node-RED, Raspberry Pi3b+, Blynk.
Scope of the Article: IoT