Design and Development of IoT Integrated PLC Based Material Handling System
Arockia Selva Kumar A.2, Aniket Babar3
1Dr. A. Arockia Selva Kumar, Senior Associate Professor, Design and Automation Research Group, Department of Mechanical and Building Sciences, Vellore Institute of Technology, Chennai (Tamil Nadu), India.
2Aniket Babar, Senior Associate Professor, Design and Automation Research Group, Department of Mechanical and Building Sciences, Vellore Institute of Technology, Chennai (Tamil Nadu), India.
Manuscript received on 14 December 2019 | Revised Manuscript received on 22 December 2019 | Manuscript Published on 31 December 2019 | PP: 73-78 | Volume-9 Issue-1S3 December 2019 | Retrieval Number: A10151291S319/19©BEIESP | DOI: 10.35940/ijeat.A1015.1291S319
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The industry faces with constant demand of tremendous Production criteria to be met with human workers this production rate is highly likely to fall behind as the time progresses, to solve the problem to obtain continuous production without any interruption, this paper helps understand how a manipulator will work for a very basic operations and how will the industry executive will be able to manage the shop floor. This project aims to show how a PLC is used in a automation and how a PLC based system is integrated with a IoT platform.
Keywords: Failure Mode, Force, IoT, Manipulator, PLC, Torque.
Scope of the Article: Materials Engineering