RFID (NFC) Antenna Design for Dedicated Mobile Applications at 88 MHz Frequency
Amit Gupta1, Sudeep Baudha2, Brajesh Mishra3
1Amit Gupta, Department of Electronics & Communication, Gyan Ganga College of technology, Jabalpur. (M.P)
2Sudeep Baudha, Department of Electronics & Communication, Gyan Ganga College of technology, Jabalpur. (M.P)
3Brajesh Mishra, Department of Electronics & Communication, Gyan Ganga College of technology, Jabalpur. (M.P)
Manuscript received on May 17, 2012. | Revised Manuscript received on June 22, 2012. | Manuscript published on June 30, 2012. | PP: 299-302 | Volume-1 Issue-5, June 2012. | Retrieval Number: E0521061512/2012©BEIESP
Open Access | Ethics and Policies | Cite
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: Near field communication (NFC) is a set of standards for smart phones and similar devices to establish radio communication with each other by touching them together or bringing them into close proximity, usually no more than a few centimeters. Present and anticipated applications include contactless transactions, data exchange, and simplified setup of more complex communications such as Wi-Fi Communication is also possible between an NFC device and an unpowered NFC chip, called a “tag” Later part of paper discuss about the RFID antenna which is tuned on 88 MHz frequency, this frequency is not yet allotted for any mobile application, so if allotted on such frequency the communication might become revolutionary. New designs with new results and all other parameters to describe the antenna design in detail.
Keywords: The rfid antenna which is tuned on 88 MHz frequency, this frequency is not yet allotted for any mobile application, so if allotted on such frequency the communication might become revolutionary.