A 2×2 Antenna Array for L Band Phased Array RADAR Applications
K. Satish1, M.Sekhar2
1K. Satish, Assistant Professor, Department of ECE, Vignan’s Foundation For Technology and Research, Guntur (Andhra Pradesh), India.
2M. Sekhar, Assistant Professor, Department of ECE, Vignan’s Foundation For Science Technology and Research, Guntur (Andhra Pradesh), India.
Manuscript received on 23 November 2019 | Revised Manuscript received on 17 December 2019 | Manuscript Published on 30 December 2019 | PP: 62-65 | Volume-9 Issue-1S5 December 2019 | Retrieval Number: A10171291S52019/19©BEIESP | DOI: 10.35940/ijeat.A1017.1291S519
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: A Four element antenna array for the Phase array RADAR applications in the L Band with an operating frequency of 1.32GHz is presented. The four patches are been connected to four different transmitter circuit with which we can control the phase of the input signal. The antenna is having a size of 212mm×212mm×1.6mm with a gain of 8.78dB and directivity of 10.31dB at the operating frequency of 1.32GHz.. Low cost FR4 material is been used as the laminate base for the antenna which will act as the dielectric material.
Keywords: Coax Feed, Phased Array, RADAR Applications.
Scope of the Article: Network Based Applications