Finite Element Analysis over Geopolymer Concrete using Abaqus
A. Chithambar Ganesh1, M. Muthukannan2
1A. Chithambar Ganesh, Assistant Professor, Department of Civil Engineering, Kalasalingam Academy of Research and Education College, Krishnankoil (Tamil Nadu), India.
2Dr. M. Muthukannan, Professor, Department of Civil Engineering, Kalasalingam Academy of Research and Education College, Krishnankoil (Tamil Nadu), India.
Manuscript received on 24 November 2019 | Revised Manuscript received on 18 December 2019 | Manuscript Published on 30 December 2019 | PP: 446-449 | Volume-9 Issue-1S4 December 2019 | Retrieval Number: A10241291S419/19©BEIESP | DOI: 10.35940/ijeat.A1024.1291S419
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: In the recent decade, lots of efforts are being taken to completely replace cement concrete with the Geopolymer concrete. Complete understanding of the Geopolymer concrete is necessary for the effective replacement of cement concrete. This research work deals with the comparison of flexural behavior of ordinary cement concrete and Geopolymer concrete is carried out. Abaqus CAE tool is effectively used to study the flexural behavior like load deflection curve, deformation pattern and the cracking pattern. Further experimental studies were carried out and the ultimate deflection was recorded and compared with results obtained from the Abaqus results. Fair results have been obtained in this study and it unleashes a lot of scope in Geopolymer concrete.
Keywords: This Research Work Deals With the Comparison of Flexural Behavior of Ordinary Cement Concrete.
Scope of the Article: Concrete Structures