Long-Term Leaching Behavior Of Petroleum Sludge Waste Containing Palm Oil Fuel Ash And Quarry Dust By Using Solidification/Stabilization Method
Mohd Ikhmal Haqeem Hassan1, Aeslina Abdul Kadir2, Nurul Nabila Huda Hashar3, Nur Jannah Abdul Hamid4, Noor Amira Sarani5
1Mohd Ikhmal Haqeem Faculty of Civil and Environmental Engineering, Micropoluttant Research Centre, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat Johor, Malaysia.
2Aeslina Abdul Kadir, Faculty of Civil and Environmental Engineering, Micropoluttant Research Centre, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat Johor, Malaysia.
3Nurul Nabila Huda Hashar, Faculty of Civil and Environmental Engineering, Micropoluttant Research Centre, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat Johor, Malaysia.
4Nur Jannah Abdul Hamid, Faculty of Civil and Environmental Engineering, Micropoluttant Research Centre, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat Johor, Malaysia.
5Noor Amira Sarani, Faculty of Civil and Environmental Engineering, Micropoluttant Research Centre, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat Johor, Malaysia
Manuscript received on February 05, 2019. | Revised Manuscript received on February 14 2019. | Manuscript published on August 30, 2019. | PP: 3562-3565 | Volume-8 Issue-6, August 2019. | Retrieval Number: F9354088619/19©BEIESP | DOI: 10.35940/ijeat.F9354.088619
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: In recent years, petroleum industry has generated huge amount of petroleum sludge. There are many types of treatment method in petroleum sludge (PS) and one of the treatments that arise the attention to treat the sludge is solidification/stabilization (S/S) method as it immobilizes and stabilizes the hazardous substances within a solid matrices. The main objectives of this research are to formulate the correct mixture of PS in S/S matrices and to stimulate the long-term leaching behaviour of S/S matrices in PS treatment with palm oil fuel ash (POFA) and quarry dust (QD) as partial cement and sand replacement respectively. The characterization of PS, POFA and QD were done by using X-Ray Fluorescence (XRF). Furthermore, different percentages of petroleum sludge (control, 0%, 5%, 10%, 20%, 30%) were incorporated with fixed 10% of POFA and 20% of QD replacement into S/S matrices. This research also includes a comparison of two different leaching test parameters such as liquid to surface area ratio, pH, and type of leaching solution on the samples. The leaching test conducted namely are Semi-Dynamic Leaching procedure (SDLP) and Static Leaching Test (SLT). The leachability results from SDLP and SLT indicated that all concentration for nine (9) heavy metals were below the permissible limit set by United States Environmental Protection Agency (USEPA, 1996) standards. In addition, the S/S effectiveness was evaluated by measuring effective diffusion coefficients (De) and leachability index (Lx). Results of S/S treatment shown that De values were lower and Lx values were higher than 8 thus the S/S can be disposed in sanitary landfill. As a conclusion, the results for the leaching behaviour of PS up to 10% incorporated with 10% of POFA replacement in cement and 20% of QD replacement in sand demonstrated minimum leaching of the heavy metals from S/S matrices. This indicated that S/S method could be an alternative disposal method for PS and has potential for replacing other treatment methods that applied at treatment stage for petroleum refinery effluents.
Keywords: petroleum sludge, solidification/stabilization, palm oil fuel ash, quarry dust, waste utilization