Operation of Wireless Humanoid Robot using Graphene Embedded Bend Sensor and Internet of Things Technology
Jitender Kumar Singh Jadon
Jitender Kumar Singh Jadon, Department of Mechanical Engineering, Shobhit Institute of Engineering and Technology, Deemed to be University, Meerut (Uttar Pradesh), India. Orcid ID: 0000-0001-6746-2400
Manuscript received on 31 August 2022 | Revised Manuscript received on 02 September 2022 | Manuscript Accepted on 15 October 2022 | Manuscript published on 30 October 2022 | PP: 19-22 | Volume-12 Issue-1, October 2022 | Retrieval Number: 100.1/ijeat.A38051012122 | DOI: 10.35940/ijeat.A3805.1012122
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The use of Robots is a trending technology but automation and Artificial Intelligence are not fully achieved till date. This paper aims to propose an innovative system to integrate human intelligence with Robotics. The robots which have been designed to work in harsh conditions are controlled using graphene-based flexible bend sensors. These sensors are applied to the human body and are powered by solar energy. Here a flexible sensor is applied on each bend on the human body and respective data of bend angle is transmitted to the raspberry pi 3 model B kits which are programmed to act accordingly and the same bend is obtained in the Robot. The sensor which we have used in this project removes the messy wiring and there is no need to wear any kind of suit. The required movements for the robot are produced by a human after applying the sensors on each joint. It looks like a pasting that is pasted across the joint. These sensors are made from a biocompatible material, thus does not have any dermatological ill effect on the operator. The graphene-based sensor has a subsequent role in robotics as they develop position matrices that determine the current position of various members of the humanoid robot. Robotic application demands sensors with a higher degree of repeatability, precision, and reliability which is obtained using the Graphene-based bend sensors. Each sensor is self-capable to carry out motion of one degree of motion. The use of an accelerometer attached along with the sensor helps to control the speed of robotic operation. This system is suitable to control the robot from a distance and uses it in critical conditions with the intelligence of the human being who is operating it, the rise in temperature leads to an increase in the time-lapse in command and action. But still, it can be treated as the substitute for artificially intelligent robots as we have not reached the level of intelligence in human beings. This work is based on the combined concepts of mechanical, computer, and electronics engineering.
Keywords: Humanoid Robot; Graphene Materials; Motion Sensor; Accelerometer; Artificial Intelligence; IoT Applications.
Scope of the Article: IoT