Design and Analysis of a Clamping Plate for Automobile using Press Tool
Dharshan B G1, K C Ananthapadmanabham2, Somashekar R3
1Dharshan B.G, Associate Professor, Department of Mechanical Engineering, Don Bosco Institute of Technology, Bangalore (Karnataka), India.
2K C Ananthapadmanabham, Associate Professor, Department of Mechanical Engineering, Don Bosco Institute of Technology, Bangalore (Karnataka), India.
3Somashekar R, Assistant Professor, Department of Mechanical Engineering, Don Bosco Institute of Technology, Bangalore (Karnataka), India.
Manuscript received on 09 February 2021 | Revised Manuscript received on 15 February 2021 | Manuscript Published on 23 February 2021 | PP: 7-11 | Volume-10 Issue-3S February 2021 | Retrieval Number: C100202103S21/21©BEIESP | DOI: 10.35940/ijeat.C1002.02103S21
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The objective of the work is to design and analysis of a press tool for component clamping plate which is used in automobile to meet the production requirement of 2,00, 000 components for an automobile. To achieve this press tool having combination of operations like blanking, piercing and bending is designed for producing a clamping plate in a single stroke in two stages and to optimize production rate and manufacturing cost. Based on features in the component, compound die is designed which can perform blanking and piecing operation in first stage followed by bending operation in the second stage. The structural analysis was carried out for the forming dies and punches which shows that both the deflections and the stresses are well within the limits.
Keywords: Clamping Plate, Die Sets, Blanking Dies, Press Tool, Piercing Punch, Forming Die and Punch.
Scope of the Article: Machine Design